The glass, in your commercial building, gets dirty every day. At some point they are dirty enough you and your employees can not see out of them. This is all because of the wind and rain that blows dirt and other material unto them. That building, depending on the height, may need basic window cleaning experts or, if much taller than that, might need high rise window cleaners
You have probably seen window jockeys who clean the glass on the first floors of many buildings. Many of them will also address the second and third floors. This is usually accomplished by the use of long poles, often with containerized water and cleansing solution. Getting to the second or third floors may require the use of scissor lifts, if on a fairly flat ground level or sidewalk.
Scissor lifts can also be be used when cleaning on the second floor. Anything higher than that can be cleaned with a boom truck. This machine will be able to handle the rougher terrain often encountered against the side of buildings. If your building is higher than that, it is probably referred to as a high rise building, as far as window cleaning is concerned.
Most of these high rise buildings already have the systems they need, installed on the roof. The various anchors that cleaners use are set up for whoever will be doing the cleaning. One of those systems is the fairly unpopular, yet fairly simple, system of repelling down the building, cleaning as they go.
The ropes are secured to an anchor, set in the roof of the building. The set up has a block and tackle that will allow the rope to be fed down and holds the rope, securely. The cleaner has another block, located at his level with a lock that can secure the chair at any height he desires.
A very popular system is the gondola. This is a larger platform than can be allowed by the repelling system. The anchor on the roof is more complicated and usually run by a wench. The gondola, usually with more than one cleaner, is lowered by the use of these pulleys and electric motor to a floor and locked into place. It can be moved from that level, down to the next one when needed.
Regardless of the height of the glass and what is used to get up there or down there, the process for cleaning is the same. The few tools that need to be used are simple. They include a bucket or belt holster, a wet bar and a couple of cloths. Some will also include a window knife for hard to remove substances.
The glass is made wet with the wet bar and scraped, if needed, with the knife. After this, it will probably be scrubbed, again, with the wet bar. The show, that many people stop and watch is the use of the squeegee. This is usually a very graceful swoop of the squeegee from the upper left, down the glass, through a swooping motion and finishing on the bottom and wiped with the cloth.
You have probably seen window jockeys who clean the glass on the first floors of many buildings. Many of them will also address the second and third floors. This is usually accomplished by the use of long poles, often with containerized water and cleansing solution. Getting to the second or third floors may require the use of scissor lifts, if on a fairly flat ground level or sidewalk.
Scissor lifts can also be be used when cleaning on the second floor. Anything higher than that can be cleaned with a boom truck. This machine will be able to handle the rougher terrain often encountered against the side of buildings. If your building is higher than that, it is probably referred to as a high rise building, as far as window cleaning is concerned.
Most of these high rise buildings already have the systems they need, installed on the roof. The various anchors that cleaners use are set up for whoever will be doing the cleaning. One of those systems is the fairly unpopular, yet fairly simple, system of repelling down the building, cleaning as they go.
The ropes are secured to an anchor, set in the roof of the building. The set up has a block and tackle that will allow the rope to be fed down and holds the rope, securely. The cleaner has another block, located at his level with a lock that can secure the chair at any height he desires.
A very popular system is the gondola. This is a larger platform than can be allowed by the repelling system. The anchor on the roof is more complicated and usually run by a wench. The gondola, usually with more than one cleaner, is lowered by the use of these pulleys and electric motor to a floor and locked into place. It can be moved from that level, down to the next one when needed.
Regardless of the height of the glass and what is used to get up there or down there, the process for cleaning is the same. The few tools that need to be used are simple. They include a bucket or belt holster, a wet bar and a couple of cloths. Some will also include a window knife for hard to remove substances.
The glass is made wet with the wet bar and scraped, if needed, with the knife. After this, it will probably be scrubbed, again, with the wet bar. The show, that many people stop and watch is the use of the squeegee. This is usually a very graceful swoop of the squeegee from the upper left, down the glass, through a swooping motion and finishing on the bottom and wiped with the cloth.
About the Author:
In order to assign trustworthy high rise window cleaners, customers are advised to refer to the related homepage first. We will put you in touch with reputable contractors immediately via this website http://www.vipspecialservices.com.
No comments:
Post a Comment